Fibreglass

Fibreglass Roof Sheeting & Roofing Supplies

Wonderglass GC

Wonderglas GC (GC = gel coated surface) is a UV-protected GRP (Glass reinforced poly) sheeting product. Chemically cross-bonded, the gel coating is 100 micron thick and is integrated with the sheet. This prevents delamination. The sheet's gel-coated surface acts as an invisible barrier, reducing surface erosion and light transmission losses to a negligible extent.

  • Hail Resistant
  • Stable Light Transmission
  • Coating with UV Stable 100 Micron Gel
  • Reduces UV Transmission by 99%
  • Low Surface Erosion
  • Chemical Resistant
  • SL, SR76 Retardant
A greenhouse with a clear roof and lots of windows

Industrial Fibreglass

Ampelite's Industrial Fibreglass (glass-reinforced polyester), which has a low thermal expansion, allows for individual lengths of up to 12.2m. All current profiles, including Trimdek (5-Rib), 700 decking, and corrugated, are available. Plus, most of the superseded profiles can be found. All Ampelite fiberglass sheets sold in Australia are made in Australia. Ampelite warrant series 2400 (and higher) standard-grade industrial fibreglass sheeting against hail up to 20mm diameter and winds up to 100 km/hr.

  • Multiple Metal Profiles
  • Blocks 99.9% of UV
  • Coated with a UV Stable 100 Micron Gel
  • Commercial & Industrial Skylights
A large yellow crane is hanging from the ceiling of a building.

Webglas GC

Webglas GC (GC = Gel Coated Surface) sheets weigh 3660g per square meter and are combined with a reinforced heavy gauge, woven glass mat. Webglas GC is so strong that no safety mesh is required. This is especially important in corrosive and aggressive environments, which can quickly damage metal. Webglas GC complies without restriction with all requirements of Class 2 through Class 9 buildings of Australia's Building Code.

  • Transparent or Coloured Panels
  • Corrosion Resistance
  • Strongest FRP Building Panels
  • Superior UV Protection
  • Cost Savings for the Life Cycle
  • Maintenance-Free/ Long Life
  • Blocks 99.9 Percent of UV Rays
A close up of a piece of plastic on a table.

Cool-lite GC

Cool-lite GC Skylights diffuse light with low heat transmission. Heat reduction sheeting can be beneficial in a number of buildings, including factories, warehouses, shopping centers, schools, gyms, and sports stadiums. Cool-lite GC can provide natural, diffused lighting that can supplement or replace energy-hungry electric illumination in single-level buildings. Cool-lite GC reduces transmitted temperatures and glare and improves air conditioning efficiency.

  • There Are No Restrictions on Width or Profile
  • Heat Transmission is Reduced
  • Natural Diffused Light
  • Reduces Energy Costs
Looking up at the ceiling of a building with a lot of windows.

Dual Roof

Ampelite's Dual Roof system can provide natural light in your workplace or recreational areas at a fraction the cost of double glazing. The system diffuses natural light evenly and eliminates condensation. It also reduces the transmission of heat.

  • Eliminates Condensation
  • Save Energy
  • Cost-Effective
  • ClearSlide or Webglas GC Can Be Combined
  • Thermal Insulation That Works
A drawing of a building with a red roof

EEFAS Skylight System

Ampelite Energy Efficient Factory Assembled Skylight (EEFAS) has been designed to complement all insulated steel panels produced by different sandwich panel manufacturers. The EEFAS system has excellent thermal insulation and conforms to the Building Code of Australia's (BCA) requirements for Class 2, 3, and 9 Buildings. EEFAS comes preassembled with the best quality components. The Ampelite EEFAS system is a sandwich panel alternative that offers exceptional spanning and single-fixing.

A large warehouse with a ceiling that has a lot of lights on it

Thermal Skylight

Thermal skylight has excellent insulation properties and conforms to the Building Code of Australia's (BCA), requirements for Class 2-9 Buildings, Part J. The thermal skylight can be installed easily on-site and is not limited by the roof length or sheet profile. The thermal skylight can be used with any roofing profile and insulation thickness. The Thermal Skylight is energy efficient and provides natural light without compromise. The thermal skylight allows for design flexibility and adaptability in your industrial or commercial building.

An empty room with a skylight in the ceiling

SR76 Smoke Reduced

Ampelite SR76 Smoke-Reduced sheeting can be made to include all the benefits of Wonderglas GC gel coating and Cool-Lite GC heating reduction sheeting. The SR76 sheet is compliant with AS1530.3 2006 and contains the finest resins.

A light is hanging from the ceiling of a building.

Get a Fibreglass Products Quote

For a fast and accurate quote, please contact our team today. Our experts are ready to assist you, providing detailed information and guidance to help you choose the best fiberglass solution for your project.

Share by: